- !! !! >>>Please see below for instructions--FOR HEAT PRESS MACHINE RATHER
1. The suggestion for setting up the printer "photo quality inkjet paper" model for best picture quality printing effect.
2. Select the color of the print design, size, please set up a mirror to print, print the pattern on the thermal transfer paper
The correct use of the face (print). Our transfer paper on ink does not have any requirements, you can use any brand
The ordinary dye ink, pigment ink, etc. But with pyrograph ink (paint ink), best can be waterproof.
3. After printing transfer paper is dry, cut out the image, you need to design around edges with at least 0.2 inches.
1. The fabric pressure level, the need for hot stamping will be placed on the thermal transfer paper print and face down to the position of hot stamping.
2. Please set the transfer temperature about 180 degrees, pyrograph machine stamping time to 25 seconds, will transfer paper printing surface and clothing. Anastomosis after placed under the pressure plate.
3. Such as iron, please warm up to the highest setting temperature (about 2 to 3 minutes), do not use the steam function.
Slow down, when hot stamping to iron to every corner and edge